Watch list

Process monitoring device for cleanrooms

PUC 24


Cleanroom panel for displaying air-conditioning data


Process monitoring system with stainless steel surface and inputs for humidity, temperature or external pressure transmitters.

Special features

  • High level of accuracy and long-term stability through automatic zero-point calibration
  • Easy configuration of the measuring range, analogue output, time constants and units via keyboard or RS 232 (optional)
  • PROFIBUS DP interface (optional)
  • Graphic LC display
  • 2 floating switching relays
  • Selectable output signal 0 .. 10 V or 0/4 .. 20 mA
  • Selectable attenuation of the output signal from 0 .. 40 s
  • Acoustic alarm when the threshold value is out of range, acknowledgement via key
  • Wall-mounted device with mounting frame
  • Can be calibrated
  • Highly stable measurements thanks to cyclical self-calibration of the zero point
  • High level of overpressure protection even in the smallest measuring ranges protects the instrument against pressure peaks or incorrect operation
  • Scalable measuring range offers increased measurement accuracy 

The PUC 24 process monitoring system is especially suitable for pressure monitoring applications in cleanrooms, laboratories, pharmaceutical plants and operating theatres. The system has two electrical inputs for humidity, temperature or external pressure transducers. The measurement values provided by these devices are displayed on the graphic LCD display. As well as recording differential pressure, it also measures positive and negative overpressure and is freely scalable within the measuring range. Two optional contact points allow the user to connect visual or audible alarms that are triggered any time values rise above or fall below specified limits. These threshold values can be set as parameters both for the internal differential pressure sensor and for the external humidity, temperature or pressure transducer. The transmitter can be configured easily via an RS 232 interface (optional) with software. This can also be performed using a keyboard and display. A selectable time constant allows the transmitter to be adjusted perfectly to the pressure conditions and thus ensures a stable output signal. The PUC 24 is suitable for wall mounting in cleanrooms due to its smooth, solvent-resistant stainless steel housing. The device is easily integrated into central building control systems via the optional PROFIBUS DP interface. In this case, the Profibus connection acts as a gateway for the analogue signals from the external transducers, which thus require no PROFIBUS DP interface of their own. The instrument is available with an ISO factory calibration or DAkkS-accredited calibration certificate (optional).

Measurement ranges
± 100 Pa or ± 250 Pa
freely scaleable within this range

Margin of error
±0.5 % of max. value
(0.3 Pa margin of error for the reference)

0 .. 10 V (Ri > 2 kΩ) or 0/4 .. 20 mA (Ri 500 Ω) adjustable
2 contact points, 6 A, 230 VAC, may be configured as desired within this pressure range

Supply voltage
24 VDC, ± 10 % smoothed

Data Interface (optional)

The instrument is available with an ISO factory calibration or DAkkS-accredited calibration certificate (optional).